Yokomo YZ-2 DTM3.1 / CAL3.1 — blank setup sheet
Buggies · 1/10 · 2WD · Electric · check kit coverage before using the diagrams
Kit documentKit coverage & reference
YZ-2 DTM3.1 / CAL3.1 stock sheet: 3 front / 5 rear upper mounts; 3 front / 4 rear lower mounts. Outline is schematic. PitSheet numbers upper holes from outside inward; lower mounts A onward from inside outward. Check optional towers against the linked sheet.
YZ-2 DTM3.1 / CAL3.1 manufacturer referenceSurface: ____________________
Front suspension
One side · enlargedShock tower3 upper mounts
← OutsideChassis →
Schematic outline. Check the source sheet for the installed parts.
Front setup
Camber
Toe
Ride height
Droop
Tires
Shock oil
Spring
Piston
Anti-roll bar
Insert
Shock length (mm)
Piston thickness (mm)
Ball stud spacing (mm)
Arm part / material
Camber link inner position
Camber link outer position
Wheel hex (mm)
Rear suspension
One side · enlargedShock tower5 upper mounts
← OutsideChassis →
Schematic outline. Check the source sheet for the installed parts.
Rear setup
Camber
Toe
Ride height
Droop
Tires
Shock oil
Spring
Piston
Anti-roll bar
Insert
Shock length (mm)
Piston thickness (mm)
Ball stud spacing (mm)
Arm part / material
Camber link inner position
Camber link outer position
Wheel hex (mm)
Chassis / drivetrain / body
Motor
ESC
ESC settings
Battery
Pinion
Spur
Differential height
Motor mount
Transmission
Front tower
Rear arm length
Rear suspension mount