Tekno ET410 · 2018 — blank setup sheet
Trucks & truggies · 1/10 · 4WD · Electric · check kit coverage before using the diagrams
Kit documentKit coverage & reference
ET410: 3 front / 3 rear upper mounts; 2 front / 2 rear lower mounts. Official ET410 manual setup sheets show three upper holes and two lower A/B positions at both ends. Rear hub A–D marks are camber-link positions, not shock mounts.
ET410 manufacturer referenceSurface: ____________________
Front suspension
One side · enlargedShock tower3 upper mounts
← OutsideChassis →
Schematic outline. Check the source sheet for the installed parts.
Front setup
Camber
Toe
Ride height
Droop
Tires
Shock oil
Spring
Piston
Anti-roll bar
Insert
Shock tower part
Camber-link location / washers
Suspension block / insert
Hub / axle-width washers
Shock length / rebound
Rear suspension
One side · enlargedShock tower3 upper mounts
← OutsideChassis →
Schematic outline. Check the source sheet for the installed parts.
Rear setup
Camber
Toe
Ride height
Droop
Tires
Shock oil
Spring
Piston
Anti-roll bar
Insert
Shock tower part
Camber-link location / washers
Suspension block / insert
Hub / axle-width washers
Shock length / rebound
Chassis / drivetrain / body
Motor
ESC
ESC settings
Battery
Pinion
Spur
Front differential / oil
Center differential / oil
Rear differential / oil
Ackermann / bump steer
Battery position
Rear chassis brace