Serpent Spyder SRX2 Gen3 with straight front arm · 2020 — blank setup sheet
Buggies · 1/10 · 2WD · Electric · check kit coverage before using the diagrams
Kit documentKit coverage & reference
Spyder SRX2 Gen3 with straight front arm: 4 front / 3 rear upper mounts; 2 front / 3 rear lower mounts. The profile is explicitly the straight-front-arm variant: four front/three rear upper holes, two straight-arm front lower holes and three rear lower holes. The optional gull front arm has three lower positions and needs a separate map.
Spyder SRX2 Gen3 with straight front arm manufacturer referenceSurface: ____________________
Front suspension
One side · enlargedShock tower4 upper mounts
← OutsideChassis →
Schematic outline. Check the source sheet for the installed parts.
Front setup
Camber
Toe
Ride height
Droop
Tires
Shock oil
Spring
Piston
Anti-roll bar
Insert
Camber-link position / shims
Wheel hex (mm)
Suspension-arm length / wheelbase
Rear suspension
One side · enlargedShock tower3 upper mounts
← OutsideChassis →
Schematic outline. Check the source sheet for the installed parts.
Rear setup
Camber
Toe
Ride height
Droop
Tires
Shock oil
Spring
Piston
Anti-roll bar
Insert
Camber-link position / shims
Wheel hex (mm)
Suspension-arm length / wheelbase
Chassis / drivetrain / body
Motor
ESC
ESC settings
Battery
Pinion
Spur
Front arm type
Rear ball / gear differential and height
Transmission layout
Slipper type / distance
Ackermann / bump-steer shims
Battery location (mm)